Joint stabilization by means of adjustable compression. This support provides a firm hold that helps to stabilize the ankle joint during movement. Its design allows to graduate the pressure to relieve the load in ligaments and tendons in a controlled way. Reference: SUPPORTTOBILLO_14329.
Transformable three-in-one function. This rest device allows you to alternate between three different configurations: cervical pillow, flat surface support and travel cushion. Its mechanical folding system facilitates the mode change in a few seconds according to the user's need.
Dual straightening and heat curly function. This electric brush allows to perform both smoothing and waves using its double-sided thermal head. Its comb design facilitates the penetration of heat from the root for precise and uniform modeling. Reference: 13984.
Hair/Barbean/Nose Cutlery LED screen No USB-C Charge Battery 1200mah Charging time 3 Hours Operating time 120 Minutes Speeds 1 Cable C-100cm Material ABS Guides 3mm Material ABS. Reference: GL69975.
Adjustable lumbar support for postural correction. This device provides a firm hold in the lower back area, helping to relieve muscle tension during physical activities. Its structure is designed to maintain column alignment during extended workdays.
Compression graduated for dynamic joint support. This knee pad exerts a uniform pressure that helps stabilize the joint during movement. It is ideal to minimize the risk of minor injuries and improve self-perception during physical activity. Reference: 13675.
Simultaneous drying and styling in one step. 1000W versatile tool that combines the power of a dryer with the precision of a brush. It allows to mold the hair while eliminating residual moisture efficiently. Reference: 13986.
Green Lyca GL69580 hair and beard clipper with LED display, USB-C charging, 7000rpm motor, 2000mAh 3.7V battery, 150-minute charging time, 140-minute operating time, four speeds, 3/6/9/12mm guides, 120cm USB-C cable and ABS body. Reference: GL69580.
Compression and stabilization of the joint. This support provides a constant and firm pressure on the shoulder to help reduce pain and stabilize the joint. Its anatomical design allows graduated compression according to the need of the end user. Reference: HOMBRO_SD4811.
Compression support for palm and wrist. Provides a firm hold that helps stabilize the carpal area during physical activity. Its elastic structure exerts a uniform pressure to reduce muscle fatigue. Reference: 13676.
Dual function for straightening and curly. This multifunctional tool 2 in 1 allows to alternate between conventional straightening and the creation of defined waves. Its constant heating system ensures uniform results in various types of hair. Reference: 14049.
Green Lyca GL69579 hair and beard clipper with LED display, USB-C charging, 7000rpm motor, 1200mAh battery, 120-minute charging time, 150-minute operating time, four speeds, 1/3/5/7mm guides, 50cm USB-C cable and ABS/PC body. Reference: GL69579.
Circular massage with integrated infrared thermotherapy. The device uses rotary nodes that simulate a deep kneading massage. Infrared heat function enhances muscle relief in areas of accumulated tension. Reference: ALMOHAMASAJE_13728. | Sami
Focused compression for joint stabilization. Provides a firm hold that helps reduce muscle fatigue during physical exercise. Its design allows for uniform pressure to be applied to the ankle area and the plantar arch. Reference: 13677.
Moulding function 2 in 1. This device allows you to create both large and small waves thanks to its specialized plate design. It is a versatile tool to achieve different hairstyle finishes with a single device. Reference: 14063.
Dual Versatility for hair and beard. This device is designed to provide optimal performance in both hair cutting and beard profiling. Its constant motor allows working on different hair densities with technical precision. Reference: GL69578.
Topical relief of joint pain. These analgesic patches are designed to act directly on the affected area, providing relief in cases of knee pain, joint discomfort and arthritis. Their formulation allows localized and effective skin absorption. Reference: Kneepatch_15499.
Acupressure lumbar relief system. This device applies mechanical pressure to specific points of the leg to mitigate discomfort to the lower back. Its mechanism acts on the sciatic nerve to offer support in daily activities. Reference: 13707.
Automatic two-way rotation system. This device incorporates a curly camera that automatically rolls the hair in both directions. It allows to create uniform waves efficiently and with a professional finish. Reference: 14066.
Muscle relief gel with arnica extract. Formulated to mitigate discomfort and daily stresses of mild intensity. It uses the natural properties of the arnica to provide a feeling of well-being in the applied area. Reference: GELDEARNICA100ML.
Active postural correction and integrated lumbar support. This device helps to align the spine and retract the shoulders to improve postural hygiene progressively. It provides a firm base in the lumbar area that reduces muscle fatigue during prolonged activities. Reference: 13754.
Versatile moulding with conical barrel. The conical design of the heating element allows to create curls of different diameters, from wide waves to defined loops. Its surface ensures a uniform distribution of heat for consistent results throughout the lock. Reference: 14099.
Topical relief formulated with Devil's Claw. This gel is specifically developed to mitigate mild daily discomfort. Its formulation takes advantage of the properties of the Devil's Claw for applications located in joints and muscles. Reference: GELGADIABLO100ML.
Postural correction by ergonomic alignment. The device applies a gentle mechanical tension to guide the shoulders towards their natural position. It helps to counteract the tendency to bend during prolonged sedentary activities. Reference: 13764.
Automatic moulding with two-way rotation. The device incorporates a mechanical turning system that automatically rolls the hair around the thermal cylinder. It allows you to select the direction of rotation to create symmetrical waves on both sides of the face. Reference: 14100.
Topical relief for daily discomfort. Gel formulated with calendula designed to mitigate mild physical discomfort in daily use. It acts locally providing a sense of immediate relief after application. Reference: GELCALENDUL100ML.
Postural correction by shoulder traction. This device facilitates the alignment of the spine by applying a controlled tension. It helps to reduce the tendency to bend during prolonged activities. Reference: 13766.
This model allows a precise temperature adjustment between 160°C and 220°C. This versatility facilitates the treatment of different types of hair fibers, from thin hair to the thickest and most rebellious. Reference: 14311.
Thermal effect using FIR technology. These socks integrate far infrared technology (FIR) and turmaline to generate heat when contact with the skin. They provide a passive heating effect focused on continuous thermal comfort. Reference: TURMALINA_15267.
Lumbar stretching and decompression of the spine. This device facilitates the natural stretching of the lumbar area, helping to release the accumulated pressure between the vertebrae. Its regular use contributes to improving postural alignment and reducing daily muscle tension. Reference: 13864.
Constant thermal performance with ceramic plates. The Surker TS-006 model incorporates ceramic coated plates that ensure a uniform heat distribution. This system minimizes friction and optimizes smoothing time in each pass. Reference: 14445.
Green Lyca G-1480 hair and beard clipper with LED display, USB-C charging, 1500mAh 3.7V battery, 150-minute charging time, 120-minute operating time, one speed, 1.5/3/6/9mm guides, 100cm USB-C cable and ABS body. Reference: G-1480.
Dimming and protection of the metatarsal area. This protector reduces pressure and friction in the forefoot area during walking. It helps to mitigate discomfort caused by the prolonged use of tight shoes or heels. Reference: TIPTOE_15326.
Postural correction by means of integral moulded compression. This device exerts a mechanical traction on the shoulders and spine to favor an upright alignment. Its technical design acts directly on the dorsal and lumbar zone to mitigate the bending. Reference: 15246.
Professional ironing with a definite undulating effect. The plates with a zig-zag texture design allow you to create volume and waves defined quickly and evenly. It is an ideal tool for performing textured hairstyles with hairdressing finishes. Reference: 14476.
Localized abdominal muscle stimulation belt. This device uses electrical impulse technology to work the abdominal area directly. It allows to perform muscle toning sessions statically, facilitating core training. Reference: CINTURA_15424.
Versatility 4 in 1 for various hairstyles. This multi-functional tool allows to make smoothings, defined curls and waves of different sizes. Its design integrates thermal plates and combs guide to cover multiple needs of styling with a single device. Reference: 14549.
Effective prevention against friction and blisters. This adhesive tape acts as a protective physical barrier that minimizes the direct friction between the footwear and the skin. Its use is preventive, avoiding the formation of lesions in critical areas such as the heel and fingers. Reference: TALLONERA_15328.
Two-way automatic curlying system. The device integrates an internal motor that allows automatic rotation of the cylinder to both senses. This function facilitates the creation of uniform waves without requiring advanced technical skills. Reference: 14550.
Simmering function for joint relief. This gel is designed to provide a feeling of relief in muscle and joint areas by massage. Its formulation acts on the applied area facilitating the relaxation of tissues. Reference: GELARTICULAXIMON.
Deep wave curler with three thermal levels. This device allows to create defined waves using a system of high depth plates. It offers three temperature adjustments to suit the specific needs of each type of hair fiber. Reference: 15170.
Hair/Barb cutter LED screen No Load Includes battery charger AA Battery 600mah Charging time 3 Hours Operating time 120 Minutes Speeds 1 Cable 80cm Material ABS Guides 1.5/3/4mm Material ABS. Reference: 14358.
Simultaneous drying and straightening dual function. This device combines the performance of a hand dryer and a thermal comb in a single tool. It allows to mold the hair while eliminating residual moisture efficiently. Reference: 14365.
Six-speed vibration system. The device incorporates six adjustable intensity levels to suit different muscle recovery needs. High-frequency vibration technology allows working from surface relaxation to deep percussion. Reference: GL69378.
Cervical stimulation using low frequency electrical pulses. The device uses controlled electrical impulse technology to act on the cervical area. It allows precise application on the tissues by means of its two contact electrodes. Reference: AO-78113.
Ultrasonic technology for facial and body care. This device uses high frequency waves to stimulate deep cell activity. Its non-invasive system helps improve the texture of the dermis and facilitates the absorption of active substances. Reference: 14104.
360 degree surround compression massage. The device integrates four rotary rollers with textured surface that provide a deep massage. This system allows covering the entire contour of the extremity simultaneously to improve circulation. Reference: 14184.
Hair/Barb/Nose/Body Cutter LED Display No USB-C Charge Battery 1000mah Load Time 6 Hours Operating Time 30 Minutes Speeds 1 Cable C-30cm Material ABS. Reference: GL69973.
TENS therapy for localized pain treatment. It uses low-frequency electrical impulses to stimulate nerves and skin pressure points. This system helps to mitigate muscle discomfort in a non-invasive way. Reference: 14424.
Phototherapy and acoustic vibration technology. This device integrates high-frequency colour LED light and vibration functions for skin treatment. The system allows to alternate between different working modes to adapt to different aesthetic needs in neck and face. Reference: 14560.
High frequency vibration stimulating points. This device integrates vibration technology designed to act on the meridians of the scalp. It facilitates muscle relaxation and helps reduce fatigue accumulated during the day. Reference: 14734.
Green Lyca G-1005 Men's Shaver professional hair clipper with 800 mAh rechargeable battery, up to 120 minutes of runtime, and a precision T-type blade. Ideal for cuts, shaping, beard trimming, and professional finishes.
Deep circular kneading massage system. This device integrates rotary nodes that simulate manual pressure technique to relieve accumulated tension in the cervical area. The bidirectional movement allows a complete stimulation of muscle tissues. Reference: 13706.
The Green Lyca Massage Gun G-1509 is a massage gun designed to provide a comfortable and effective muscle massage. Its ergonomic design facilitates use in different areas of the body and features 4 interchangeable heads Ideal for those looking to relieve muscle tension and enjoy a personalized massage experience with a modern and compact design team.
Hair Cutlery LED screen No charging USB-C RPM Motor 7500 Battery 1200 MAH Load time 120 Minutes Operating time 120 Minutes Speeds 1 Guides 1,2,3mm Cable C- 50cm Material ABS. Reference: GL69970.
Hair/Barbean Cutlery LED Display If USB-C Battery 1500MAH/3,7v Load Time 120 Minutes Operating Time 150 Minutes Speeds 1 Guides 3, 6, 9, 13 mm Cable C-100cm Material ABS/PC. Reference: GL69651.
GL69650 hair clipper with LED display, USB-B charging, 1500mAh 3.7V battery, 120-minute charging time, 180-minute operating time, one speed, 3/6/9/13mm guides, 150cm USB-B cable and ABS/PC body. Reference: GL69650.
Hair/Barbean Cutlery LED Display If Charged USB-C Battery 1200MAH/3,7v Load Time 120Minutes Operating Time 150Minutes Speeds 1 Guides 1.5/2/3/4mm Cable C-80cm Material ABS. Reference: G-1001.
Barb cutter LED screen No RPM Motor 6600rpm USB-C charging Battery 500mah Charging time 60 Minutes Operating time 90 Minutes Speeds 1 Guides 1/2/3mm Cable C-50cm Material ABS. Reference: GL69625.
Green Lyca GL69595 hair clipper with LED display, USB-C charging, 1200mAh 3.7V battery, 60-minute charging time, 120-minute operating time, one speed, 1/2/3/4mm guides, 80cm USB-C cable and ABS body. Reference: GL69595.
Hair/Barb cutter LED screen if USB-C battery 1200MAH/3,7v charging time 120Minutes Operating time 120Minutes Speeds 1 Guides 1,2,3mm Cable C-80cm Material ABS. Reference: GL69926.
We use our own and third-party cookies for functional, analytical, and personalization purposes, to improve your browsing experience and show you content tailored to your interests. By continuing to browse or by clicking “Accept”, you consent to the use of all cookies. You can configure or reject them at any time from the settings panel.
Español
Français
Português
